0520 Upper transmission CNC bending machine

0520 Upper transmission CNC bending machine

0520 Upper transmission CNC bending machine


  • Product No.: AG-0520

Details

 Main structure and performance

1. The machine drive transmission structure is a lower-moving design.

2. The machine tool has a perfect design and manufacturing process, which can effectively guarantee the manufacturing and use accuracy of the machine tool. The frame is welded with a steel plate and has sufficient strength and rigidity.

3. The main components of the machine tool are treated with stress relief. The overall frame is iron-blasted with sandblasting and rust-proof paint.

4. This machine adopts rigid mechanical synchronization, which is stable and reliable, and ensures that the worktable and the lower slider are in parallel, which effectively controls the bending precision. When the unilateral load exceeds a certain range, the unit can effectively protect.

5. The cylinder is made of forgings

6. The hydraulic circuit of the hydraulic device of the machine is simplified, no oil leakage, convenient for maintenance and inspection.

7. This machine adopts rolling guides, which is light in weight and low in noise.

8. After the lower slider of the machine is separated from the working area, it can be stopped at any position through the mechanical stop, which effectively improves the working efficiency. (Type 2 machine can be set by computer)

9. The upper workbench is equipped with a wedge-type deflection compensation device, which can realize partial bending compensation to ensure that the bending angle of the workpiece is consistent in the whole length.

10. This machine is equipped with each set of upper and lower molds. The upper and lower molds are all quenched. The upper mold is standard upper mold, the lower mold is double groove mold, and the middle plate is fast clamping device.

11. The back material is controlled by the numerical control system, and the large lead ball screw motion pair is used to drive the servo motor. The rear block retaining finger has a scale display, which is convenient, flexible and accurate.

12. The numerical control system is a suspended operation station, which can swing freely in the operation area, and the pedal-operated operating system can operate at any position in the bending area.

Parameter

Nominal force

500 kN

Table length

2000mm

Column spacing

1720mm

Throat depth

400-405mm

Lower table maximum stroke

100mm

Maximum opening height between the upper table and the lower table

370375mm

Maximum mold height

250255mm

Lower table travel speed

Approach speed

55 mm/s

 

Bending speed

adjustable

Return speed

4766 mm/s

Back gauge travel

500 mm

Main motor power

4.0KW

Machine weight

3800KG

Machine dimensions (length × width × height)

2255×1440×2070 mm

Fuel tank capacity

38L

Inquiry

INQUIRY NOW
  •  
  • * (All * must be filled in)

Related Products